Sb-filters Cold Air Intake Kit - Cotton Filter 75-5023 Bedienungsanleitung PDF herunterladen

1. With the ignition switched off and the

parking brake set, disconnect the negative

battery cable.

INSTALLATION INSTRUCTIONS

VEHICLE APPLICATION

Year: 2004

Make: Ford

Model: F150

Engine: 5.4L

TOOLS REQUIRED

•

8, 10, 13mm Wrench or Socket

•

1/2” Wrench or Socket

•

T-20 Security Torx Wrench (Supplied w/ Kit)

•

5/16” Nut Driver or Flat Blade Screwdriver

•

Ratchet

S&B FILTER OIL

Your Air Filter P/N: KF-1049 is factory oiled and

ready to use. When serviced it will require:

71g - Main Body

17g - Power Stack (Top)

NOTES

Kit may not ﬁt with the following

Aftermarket Parts Installed:

•

Body Lift

•

Custom Hood

•

Throttle Body Upgrade

•

Throttle Body Spacer

BEFORE YOU START

•

Please read the entire product guide before proceeding.

•

Ensure all components listed on page 4 are present.

•

If you are missing any of the components, call our customer support at (909) 947-0015.

•

Do not attempt to work on your vehicle while engine is hot.

•

Make sure the engine is turned off and the vehicle is in Park or the Parking Brake is set.

787 S. Wanamaker, Ontario, CA 91761 - Phone: (909) 947-0015 - Fax: (909) 947-0603 - www.sbﬁlters.com

4. IF EQUIPPED: Disconnect the brake

boost vacuum line from the air box on the

Driverʼs side. Note: ONLY IF EQUIPPED, the

S&B tube (C) must be cut at the trim line prior

to installation.

7. Unclip the wire loom from the OE air box.

2. Disconnect the crank case vent line from

the passenger side valve cover and air box

and remove.

5. IF EQUIPPED: Remove the bolt that

secures the OE intake tube assembly to the

engine.

8. Pull up at the throttle body to remove the

intake assembly from the vehicle.

3. Disconnect the electrical connection for

the MAF sensor, at the air box on the Driverʼs

side.

6. Remove the 4 studded bolts that secure

the OE air box to the intake manifold.

9. IF EQUIPPED: Remove the OE tube

bracket only. Re-install the lower nut on the

mounting stud and tighten.

P/N: 75-5023 / 75-5023D

SEE EXPLODED VIEW ON PAGE 4

No Brake Boost Vacuum Line

Notice the factory cap installed.

1 2 3 4

Inhaltsverzeichnis

Seite 1 - P/N: 75-5023 / 75-5023D

1. With the ignition switched off and the parking brake set, disconnect the negative battery cable. INSTALLATION INSTRUCTIONSVEHICLE APPLICATIONYear:

Seite 2

12. Install the Step Adapter (P) on the Air Box (O) fender snout, push on as far as it will go and secure with a #56 hose clamp (F).787 S. Wanamaker,

Seite 3

EMISSIONS STANDARDThe California Air Resource Board (CARB) requires that an E.O. identification label be applied to the vehicle in order to pass a smo

Seite 4 - EXPLODED VIEW

ITEMQTY.DESCRIPTIONP/NA1Hose, 18” Crank Case VentAI1038-00B2Hose Clamp, #8AG1000-00C1Intake TubeAL1148-00D2Hose Clamp, #60AG1008-00E1Adapter, Step, 3.

Kommentare zu diesen Handbüchern

Keine Kommentare

Sb-filters Cold Air Intake Kit - Cotton Filter 75-5023 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Zubehör für die Luft Sb-filters Cold Air Intake Kit - Cotton Filter 75-5023 herunter. S&B Filters Cold Air Intake Kit - Cotton Filter 75-5023 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Zubehör für die Luft Sb-filters Cold Air Intake Kit - Cotton Filter 75-5023